All Mountain vs. Enduro
Application area
Ample suspension travel, excellent handling, top uphill and downhill performance, great versatility: At first glance, the similarities between enduro and all-mountain bikes outweigh the similarities. The two representatives of the Aggressive Series, the R.X375 and the R.E375, also have a lot in common, so let's take a closer look.
Range of use of the trail king
The R.X375 is our all-mountain bike. It is the larger all-rounder, with very good performance downhill, but not designed for absolute top speed downhill. The fun on the trail is in the foreground - the experience of being outside. Its altitude profile is balanced, with a pronounced touring character, uphill and downhill have an equal importance.
Checkpoints:
- High versatility for eMTB tours on demanding, technical trails with fast single trail passages and smaller offsets, partially blocked, flowy
- Larger roots and stones, steps and landings
Range of application of the daredevil
The Enduro R.E375 goes a step further in the direction of downhill performance. It is designed for best times downhill, always wants to move on the ideal line, it shows a clear race character. The R.E375 is driven by speed, feels most comfortable in demanding terrain. Its altitude profile: moderate uphill, steep downhill.
Checkpoints:
- Consistently speed-oriented race enduro for fast, rough trails, adrenaline-driven, technical descents in very rough, blocked or steep terrain, challenging root passages, stone fields
- Fast berms and massive jumps, extreme steep sections, hairpin bends and steps
Spring travel and kinematics
This is where the most obvious difference is found in the frame designs. While all-mountain bikes generally move in the range of 130mm-150mm suspension travel, it may be a little more in the enduro: 150-170mm.
Our R.E375 has 160mm travel at the rear and kinematics at the rear end designed for enduro use. The gear ratio between the travel of the rear wheel during compression and the stroke at the damper starts at 3.2. Thus, a higher force acts on the damper at the beginning and less force is needed to compress it. A sensitive response is the result. Over the entire spring travel, the transmission ratio drops to approx. 2.26; less force arrives in the damper per travel of the rear wheel. The high progression towards the end of the suspension travel means that the damper does not rush through. In the terrain, this means ample reserves even in large jumps, as they are popular in downhill.
The All Mountain R.X375 has with 145mm travel not only slightly less travel than the R.E375, it also has a slightly different kinematics. The damper has less stroke, the positioning of the bearing points is also adjusted. Due to the reduced suspension travel, the R.X375 has a slightly higher progression compared to the R.E375. Here, the gear ratio starts at about 3.3 and moves to about 2.3 over the entire compression stroke. The overall tuning with the damper tune results in slightly less progressive kinematics compared to the R.E375. In combination with a slight lowering of the bottom bracket as well as an approx. 5 mm longer chainstay results in a chassis that is ideal for an active, agile riding style of a modern all-mountain bike.
Checkpoints:
- Enduro and All Mountain have different travel ranges
- With our R.X375 it is 145mm, with the R.E375 170mm
- The kinematics of the R.E375 is designed for sensitive response and high final progression, has more reserves
- The kinematics of the R.X375 are tighter and more direct; for drivers with an active, agile riding style. The chassis offers less reserves in comparison and seems a bit more light-footed
Geometry
Due to its greater focus on the downhill, we have given the Enduro R.E375 compared to the R.X375 a 3 degree flatter steering angle. The effect: Downhill, greater driving stability is achieved, the bike is easier to control, especially at high speeds. The steep seat angle compensates for the somewhat reduced uphill performance and makes up for the fact that there is less pressure on the front wheel. Wheelbase and reach are also increased compared to the R.X375, which supports high smoothness and control.
The geometry of the All Mountain R.X375 is clearly more tour-friendly. About 10mm less reach and the 75.5 ° seat angle bring a balanced, sporty seating position; on longer routes it can score with more comfort. The steering angle is steeper, it can be brought more pressure on the front wheel, the characteristics on the trail and in the Uphill improve thereby. In both bikes, a lot of emphasis was placed on good handling, in the R.X375 this stands out more in the low and medium speed range, the Enduro R.E375 offers its best handling there, when it gets really fast.
Checkpoints:
- The geometry fundamentally determines the riding characteristics of a bike
- A flat steering angle, large reach, long wheelbase and steep seat angle are significantly responsible for the downhill characteristics of an enduro
- Steep steering angle and moderate reach give a trail bike good touring and Uphill characteristics
Components
In terms of component selection, there is the greatest overlap between enduros and all-mountain bikes - apart from the suspension elements with different suspension travel (and wheels, tires). Without further ado, you could equip two bikes of the different categories with the same parts. Remote post, stable wheels, wide handlebars or tires with a lot of grip belong to every all-mountain or enduro, here it is up to the ideas of the driver, how his bike should look. To meet the touring character, one would build an all mountain tends to be somewhat lighter, the additional stability, for example, in terms of wheels, is usually not necessary. Lower weight then brings advantages in the uphill and in handling at lower speeds. Extremely wide handlebars and parts with increased stability correspond more to the enduro idea, especially in terms of competitions. It thus depends very much on how you want to use your enduro or trail bike. Accordingly, the choice of components.
Checkpoints:
- The choice of components is based on the area of use and the personal preferences defined by the rider.
- An all-mountain tends to be a little easier to build. An enduro requires more travel and more robust part, so it is slightly heavier and at the same time more stable