R.E+

ULTRA

The Enduro eMTB R.E+ impresses with greater smoothness and its great control during rapid descents. The compact integrated power unit (IPU) allows for very agile geometry with short chain stays. The battery is structurally integrated into part of the bottom tube and has an impressive degree of stiffness while still keeping the weight down. With 648 Wh or 518 Wh (depending on the model) the IPU also offers a lot of drive to overcome long, steep sections. The performance optimised Brose Drive S does not generate any additional resistance after cutting out above the legal speed limit because it disengages completely. This means the bike remains easy to pedal even at speeds in excess of 25 km/h. The perfectly aligned kinematics of the R.E+ provide direct responsiveness, a stable mean travel range and high traction. The influence of the drive was minimalised here and virtual pivots are adapted to the additional motor power. The R.E+ has an impressive stable aluminium frame with a Crankbrothers Highline telescopic seat post. eMTB specific components, such as the DT Swiss Hybrid wheel set and 34” FOX forks, complete the Enduro eMTB. The R.E+ covers a very wide range of uses due to the different possible frame variants and support from the motor. The powerful XMS chassis provides great fun riding local trails, race circuits and bike parks.

Details

IPU.R.660.CARBON

Removable, rechargeable battery with a total output of 648 Wh combine with a Brose Drive S engine with greater efficiency and improved temperature management

More about IPU

ROTWILD XMS suspension system

Kinematics with 160 mm suspension travel perfectly tailored to engine capability, virtual pivot point guarantees direct shock actuation, solid mid-stroke travel, behavior for maximum traction

More about kinematics

MHS I AR

Specially designed headset with a steering stop (65° swivel angle) on both sides

More about MHS

Integrated Cockpit

Internal routing of electrical cables for a clean and trouble free ride

Geometry

  SIZE     M L XL
A SEAT TUBE LENGTH (mm)   445 485 535
B TOP TUBE LENGTH (mm)   595 623 650
C HEAD TUBE LENGTH (mm)   110 120 130
D CHAIN STAY LENGTH (mm)   450
E BOTTOM BRACKET (mm)   347,5
             
F HEAD TUBE ANGLE ( ° )   66,0
G SEAT TUBE ANGLE ( ° )   74,7
             
H WHEELBASE (mm)   1190 1218 1248
I STANDOVER (mm)   760 787 792
             
J REACH (mm)   430 455 480
K STACK (mm)   594 603 613
Pro

Configuration ULTRA

Headset

ROTWILD MHS I AR TAPERED TI

Rear shock

FOX FLOAT 3-POS DPS EVOL LSC
FACTORY KASHIMA

Fork

FOX 36 FLOAT27.5 170 3-POS FIT4 LSC
FACTORY KASHIMA E-BIKE

Bar

CRANKBROTHERS E35
780 MM

Stem

CRANKBROTHERS E35
50 MM (M, L) / 70 MM(XL)

Seat post

CRANKBROTHERS HIGHLINE
Ø31.6 x 150 MM (M/L) / 170 MM (XL)

Saddle

ERGON SME30

Grips

ERGON GE10 SLIM

Crank

E13 TRS+ CARBON
165 mm / E13 SPYDER ISIS II - BOOST

Shifter

SHIMANO XTR I-SPEC EV

Rear derailleur

SHIMANO XTR 9100 12 Speed

Cassette

SHIMANO XTR 9100 10-51T. 12-SPEED

Brake

SHIMANO XTR 9120 FIN PAD

Rotor

SHIMANO RT99/900 SENSOR ICE 203/180

Wheelset

DT SWISS 27.5 HX1501 SPLINE ONE (30)
110-15/148-12 TAS CL

Tire

CONTINENTAL BARON PROJEKT
PROTECTION 27.5x2.40

Battery

IPU.660.R CARBON / REMOVABLE
PROTECTION COVER

Display

BLOKS 14D REMOTE / CONNECT C

Drive Unit

BROSE DRIVE S
AIR COOLER

from  8,299 €

(suggested retail price, may vary due to national VAT)

Always up-to-date with our ROTWILD newsletter

Join now for free